Messages

581

General Mach Discussion / Re: NEWBIE- HELP PLEASE! WORK PIECE NOT SHOWING IN CORRECT POSITION

« on: February 10, 2021, 12:27:25 PM »

you can try to set Config -> Home and Softlimits -> Home Off.
for X and Y axis to a value that lower left of table is Zero and not negative:

582

General Mach Discussion / Re: NEWBIE- HELP PLEASE! WORK PIECE NOT SHOWING IN CORRECT POSITION

« on: February 10, 2021, 11:13:27 AM »

it is allways a bit confusing if you view your table.
movements are allways related from your millbit to the workpiece

so if your table moves to the left millbit related to the worpiece is moving to the right.

i try to explane from Keyboard arrow key's

key left -> X- -> table moves to the right -> millbit on workpiece moves to the left
key right -> X+ -> table moves to the left -> millbit on workpiece moves to the right
key down -> Y- -> table moves up -> millbit on workpiece moves down
key up -> Y+ -> table moves down -> millbit on workpiece moves up

for reference normaly is in your case:
for X table is far right (witch is workpiece related left) and
for Y table is far up (witch is workpiece related down)

after ref all your millbit has to be at the left lower Corner of the table

583

General Mach Discussion / Re: zero setting changes after running program

« on: February 07, 2021, 06:15:46 AM »

have you selected in Config -> General Config -> Persistent Offsets and Persistent DROs ?

584

General Mach Discussion / Re: zero setting changes after running program

« on: February 06, 2021, 08:12:42 AM »

are only the displayed values on Screen not Zero, or is the machine physicaly not at Zero?

585

G-Code, CAD, and CAM discussions / Re: NOOB with a gcode question...?

« on: February 05, 2021, 01:56:04 AM »

Vectric did.

N140 is the code to initiate toolchange
N160 is the code to activate tool length compensation

586

G-Code, CAD, and CAM discussions / Re: NOOB with a gcode question...?

« on: February 05, 2021, 01:41:25 AM »

if you are not working with toolchange and tool length compensation you can delete line N140 and N160 completly.

587

General Mach Discussion / Re: Won’t finish homing

« on: February 05, 2021, 01:37:14 AM »

have you tryed to go to diagnostic Screen an reference axis by axis seperatly?

588

General Mach Discussion / Re: Mach3 problems with Windows 10 updates

« on: February 04, 2021, 01:27:09 AM »

https://www.machsupport.com/forum/index.php?topic=37291.0

589

General Mach Discussion / Re: New member, some mach 3 setup questions and UC100 intermittent connection issue

« on: February 04, 2021, 01:25:47 AM »

ok, it depends allways a bit on the need's and on the Money you want to spend, but IMHO good choises are:

-UC300Eth
-Uc400Eth
-AXBB-E
-all hicon Controllers
-PoKeys57CNC
-CSLab (only Mach3 or their own product SimCNC)

this is only my small list of controller's, i have only experience with CSLab, witch i use on all my machines.
the rest is only based on what i see (read) here in the Forum.

590

VB and the development of wizards / Re: Mach3 CSMIO 4KW Spindel mit ISO20 Aufnahme, werkzeugwechsel

« on: February 03, 2021, 12:52:49 PM »

mir ist noch was aufgefallen,
es gibt bei Config -> Ports&Pins -> Input signals gar keinen Input7?
Oder Input 7 an der CSMIO ?