Messages

3201

Mach3 and G-Rex / Re: To Grex or not to Grex?

« on: April 18, 2006, 06:55:32 PM »

There is no backlash comp in the Grex now It also is not a closed loop at this point...

3202

Mach3 and G-Rex / Re: Upload firmaware

« on: April 18, 2006, 06:53:14 PM »

I have to let mine set for about 20 Sec then I can hook up to it... How long do you let it set for?

3203

General Mach Discussion / Re: Help me please! - cannot import DXF, or anything.

« on: April 17, 2006, 11:37:53 PM »

Frank if you can mail me the DXF I will see if I can fix Lcam to make it load

3204

Show"N"Tell ( Your Machines) / Got My mill running :)

« on: April 17, 2006, 11:34:55 PM »

So I have the Grex running on a Mill


It is running well with the 1 KW servo motors that are on it with 2500PPR encoders and I am feeding pulses at 250,000 pps this is MUCH faster than Mach3... The drawing was done at 300IPM and the mill is about 3500 Lb with a 3Hp motor. Very nice for this little mill...

<a href="http://machsupport.com/forum/index.php?action=dlattach;topic=502.0;id=383" target="_blank" rel="noopener noreferrer" class="bbc_link bbc_flash_disabled new_win">http://machsupport.com/forum/index.php?action=dlattach;topic=502.0;id=383</a>

[attachment deleted by admin]

3205

Mach3 and G-Rex / Re: To Grex or not to Grex?

« on: April 17, 2006, 11:29:30 PM »

It is going to be a bit before the Grex is fully tested... If you need to run the machine today and make parts please look into getting set up with the printerport and then you can move over to the Grex after.
thanks
Brian

3206

LazyCam (Beta) / Re: Lazycam layers/cutting orders

« on: April 17, 2006, 11:24:57 PM »

I may have busted that On the list
thanks
Brian

3207

General Mach Discussion / Re: mach2 and G76

« on: April 17, 2006, 11:23:58 PM »

Here is a shot at getting you running ...

3208

General Mach Discussion / Re: X-Axis stutters when moving X &Y with Cursor-keys

« on: April 17, 2006, 09:35:18 PM »

David I see that you have your port set to zero... this has to be the wrong XML...

3209

Works in progress / Re: An unfinished screen set - "Mach Blue"

« on: April 16, 2006, 10:13:10 PM »

It is nice to see you guys having fun!

3210

General Mach Discussion / Re: mach2 and G76

« on: April 16, 2006, 09:59:06 PM »

PLease post the XML file that you are running and I will make it so you can run Mach3 ... You can have Mach3 and Mach2 on the same system