194
« on: February 13, 2016, 09:12:19 PM »
YOu are the type that does not listen and is unwilling to learn (;-). You cannot seem to shake that % of a move move thing you have going on in your head. NOW you are even trying to LIE to teh machine by changing teh DRO values to BEND its will to MAKE it do what you want.
It ain't NEVER gonna happen this way sport . You were given teh working code long ago all you had to do was finish the equation to find Center of 2 points and you blew all that off because it did not fit your% of a move move thingy (;-)
Sad part is if your were really cleaver there is another working example of teh Center of circle code right here on this site. Probably MORE than one at that.
I suggest you stop what you are doing and go back and learn basic Gcode controlling of your machine. Then when you fully understand Inc and Abs modes AND teh quadrant MATH and after you have read all the ink off all teh pertanent manuals on macro programing give this another shot. It ain't rocket science it is basic Gcode Macro programming. It is meant to be very simple and IF you understand Gcode and basic programming it is.
Good Luck, And may the Force be with you (;-)TP