Hi,
I am another new guy, I have lurked for a bit and now the boss is riding my coat tails to get things setup properly.
The problem I am having so far seems to be two fold. One=the display of the project in the table display shows the project being in the -Y-X direction so far that it is completely off the work table. I was wondering if there is something to change that. two= I have a large CNC router that is 120"x55" total table size, workable size is only slightly smaller. I have been using lazycam as well as the NFD wizards to route letters, the current sign I am working on is 72" long and I need to be able to turn the sign 90* in the program so that it will cut the sign on the Y axis as apposed to the X axis. I can try to make this more clear to any one willing to help, Thak you for your time.
Grizz