Messages

101

FAQs / Re: Better card for mach 3 turn

« on: February 22, 2023, 10:19:32 AM »

And what is the sensor picking up?

https://cncdrive.com/UC100.html

102

FAQs / Re: Better card for mach 3 turn

« on: February 22, 2023, 08:17:47 AM »

Sorry, I don't understand what you are asking.  I use the UC100 card for my lathe with Mach3 if you want a recommendation.

If you are asking what might be wrong with what you have, from the description it may be that the debounce time is wrong.  What sort of spindle sensor do you have?  What is the debounce tine set to?

103

FAQs / Re: Better card for mach 3 turn

« on: February 22, 2023, 02:19:13 AM »

UC100

104

General Mach Discussion / Re: Mach3 M98 ignored

« on: February 17, 2023, 02:42:27 AM »

Excellent!   Glad it's fixed and worth knowing that!

105

General Mach Discussion / Re: Mach3 M98 ignored

« on: February 16, 2023, 12:13:04 PM »

Well I just tried it in simulation and it worked fine v03.422

106

General Mach Discussion / Re: Mach3 M98 ignored

« on: February 15, 2023, 11:09:59 AM »

Here is some code (actually for knurling with a rotary axis) which I know works.

G00 X1 Y0 Z67.595
G91
G00 A5
F100
G01 Z-1.397
M98 p2000 L37
G00 X1 Y0 Z67.595
G90
o2000
G91
G01 X10.783 A97.297
G01 X-10.783 A97.297
M99

The main difference I can see is that the "o" in o2000 is lower case.

107

General Mach Discussion / Re: Mach3 M98 ignored

« on: February 15, 2023, 08:01:03 AM »

https://www.cnczone.com/forums/mach-software-artsoft-software-/370418-mach-3-m98-can-get-work-please.html

Might help?

108

General Mach Discussion / Re: mach 3 turn data file

« on: February 12, 2023, 10:03:31 AM »

Ah, apologies, I misremembered, it was the mill tool table export/import that showed the file location.

109

General Mach Discussion / Re: mach 3 turn data file

« on: February 12, 2023, 08:55:24 AM »

I'll have to go and look at my tool setting macro, give me a couple hours.

110

FAQs / Re: Mach3 V0.2 threading gives half of pitch exspected

« on: February 07, 2023, 02:19:21 PM »

With hall sensor you may not need any denounce.