4941
FAQs / Re: Setting up motor tuning
« on: January 19, 2014, 05:57:49 AM »
From what you describe it is unlikely be a Mach3 problem.
I am a bit concerned that you have said "seems OK" - you really need to be absolutely certain.
Try this and report back...
Using the arrow jog keys move each axis from end to end and listen carefully to the stepper motors sound. If it occasionally makes a stutter or tick that could be a sign of missing steps which then needs to be investigated.
Tweakie.
I am a bit concerned that you have said "seems OK" - you really need to be absolutely certain.
Try this and report back...
Using the arrow jog keys move each axis from end to end and listen carefully to the stepper motors sound. If it occasionally makes a stutter or tick that could be a sign of missing steps which then needs to be investigated.
Tweakie.