3961
G-Code, CAD, and CAM discussions / Re: M11P1 and M10P1 problem...
« on: January 03, 2016, 06:33:29 AM »
Hi Murat,
Two things you need to consider…
If you are using Output#1 to trigger your laser then do not use Output #1 for your spindle relay control (M3,M4,M5).
The commands M11P1 (turn Output#1 ON) and M10P1 (turn Output#1 OFF) only take effect upon axis (any axis) movement.
So to operate your laser you would need something like this…
M11P1
X10
M10P1
X0
%
There are more details in the laser thread here; http://www.machsupport.com/forum/index.php/topic,12444.0.html
Tweakie.
Two things you need to consider…
If you are using Output#1 to trigger your laser then do not use Output #1 for your spindle relay control (M3,M4,M5).
The commands M11P1 (turn Output#1 ON) and M10P1 (turn Output#1 OFF) only take effect upon axis (any axis) movement.
So to operate your laser you would need something like this…
M11P1
X10
M10P1
X0
%
There are more details in the laser thread here; http://www.machsupport.com/forum/index.php/topic,12444.0.html
Tweakie.