Machsupport Forum

Mach Discussion => Brains Development => Topic started by: lab auto man on April 01, 2009, 08:53:08 PM

Title: converting step and direction to CW, CCW
Post by: lab auto man on April 01, 2009, 08:53:08 PM

My drivers have two inputs, clockwise and counterclockwise.  I can convert the step and direction output to CW and CCW with an inverter and a 2 AND gates but is there a way to do by software with brains?

Thanks,
Todd

Title: Re: converting step and direction to CW, CCW
Post by: HillBilly on April 07, 2009, 07:43:13 AM

Brains will not do this. It would have to be programmed into Mach, like the MaxNC choices.

Darek