6101
FAQs / Re: Can Mach3 Do PCB Drilling using an NC file
« on: March 09, 2012, 02:45:41 AM »
Hi rcheng111,
No problem.
You could use the free program Eagle and it's associated processor to create both the PCB and the drill file but there are also many other alternatives to choose from.
Here is a link to get you started http://pcbgcode.org/
Tweakie.
No problem.
You could use the free program Eagle and it's associated processor to create both the PCB and the drill file but there are also many other alternatives to choose from.
Here is a link to get you started http://pcbgcode.org/
Tweakie.