5281
G-Code, CAD, and CAM discussions / Re: Rookie getting radius on corners
« on: December 13, 2009, 02:03:33 PM »
The size of the radius is directly related to your acceleration settings. The pic tells me that your acceleration is pretty slow. Try getting your accel faster, even at the expense of some top speed if you need to. Accel is usually more important to good machine performance than top speed.
However, you'll still get some rounding, even with faster accel. What you can do, is go to General Config, under CV options, check stop CV on angles >. Try it at 89 or 90 degrees.
However, you'll still get some rounding, even with faster accel. What you can do, is go to General Config, under CV options, check stop CV on angles >. Try it at 89 or 90 degrees.