5891
General Mach Discussion / Re: bob cad with mach 3 question
« on: August 23, 2009, 10:48:27 AM »
Hmm....,
If the drawing is done such that X and Y are at 0 for the origin, then if you have " As Drawn" checked
it will bring the drawing in at that origin. ( see 6.2.3 in manual ). What i do not know is how BoBCAD exports the
drawing and if you need to do something before you export it.
RICH
If the drawing is done such that X and Y are at 0 for the origin, then if you have " As Drawn" checked
it will bring the drawing in at that origin. ( see 6.2.3 in manual ). What i do not know is how BoBCAD exports the
drawing and if you need to do something before you export it.
RICH