2205
« on: January 01, 2015, 02:37:05 PM »
If you want it to always go to the same place after cutting, then Imo, the best way to do it is to add the move top your post processor.
You could also set your home position to there as well, but then the machine will always move there before it starts cutting. But you can also edit that out of the post processor as well.
With my 2010 Screenset, I have a Park Position macro, which sends the machine to the Park Position specified in the screenset. I add the macro to the vectric post processor, so the machine always goes to the park position after cutting. The nice thing about this method is that BY changinge the park position in the screenset, I can have the same g-code program finish in different positions without altering the g-code.
Like many things with Mach3 and CNC, there are many different ways to achieve what you want.