Mastercam 9 & 10X Mach 3 Postprocessor

[Ryanstewart86]

Hi guys

i found this mach3 postprocessor for mastercam 9 and i converted it to the mastercam x format through the mastercam software which it allows you to do so and here it is:

Mastercam 9 format: http://cnc.novalab.org/files/MACH3B_for_MC9.zip

Mastercam X format is attached

It supports 3 or 4 axis machines!

Hope you find it useful!

Ryanstewart86

[Tiwanacote]

Thankyou very much!!!
Tiwanacote!

[AntonioG]

Gracias por su aporte, en espera de poder ser util a ustedes.

[AntonioG]

Saludos encontre un driver paso direccion y trabaja bien con Mach3 y los datos son los siguientes: SERVOPACK  YASKAWA-onronAC IMPUTMODEL SJDE-08 APA-0Y1 PH 200-220 v-50-60 HZ  8.9 A AC-OUTPUT· PH. 0 230V- 0 300 HZ3.7A-750 W todo hecho en CHINA

[dishawcues]

I have been using this post with MC9 for years works great is there a way to remove the () in MC's toolpath manual entry EX:

(G91 A60.0 F50.0)
(G90)

[hightechkey]

Hello Sir,
     How can I insert this post file to Matser Cam 10. Please give me instruction. I found some post file for MasterCam 10. This will come with other MMD file and control file including pst file. Please.....

High Tech Key

[d12x]

Thank Kyou..

 sir...