Hello Guest it is March 28, 2024, 10:37:00 AM

Author Topic: Manual move of Z axis is disabled at a tool change. What's up?  (Read 1164 times)

0 Members and 1 Guest are viewing this topic.

I'm in the middle of a run and have a tool change.  I can't get the Z axis to move up to get clearance for the tool change. Is there something simple I'm missing?
Re: Manual move of Z axis is disabled at a tool change. What's up?
« Reply #1 on: August 10, 2018, 02:21:47 PM »
Hi,
the motion controller is still commanded by the Gcode interpreter. In order to have jogging work the motion controller must come under
Mach's GUI control ie the Gcode interpreter must temporarily cease.

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Manual move of Z axis is disabled at a tool change. What's up?
« Reply #2 on: August 10, 2018, 02:50:13 PM »
Have your M6 macro lift the Z axis.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html