Hello Guest it is March 29, 2024, 12:49:07 AM

Author Topic: G95 mill G99 lathe feed per revolution is it motion controller functn dependant?  (Read 2619 times)

0 Members and 1 Guest are viewing this topic.


Mach4 Mill, page 6, bottom, G94 Feed per Minute, G95 Feed per Revolution
http://www.machsupport.com/wp-content/uploads/2014/05/Mach4%20Mill%20GCode%20Manual.pdf

Mach4 Lathe, page 7 bottom, G98 Feed Per Minute, G99 Feed Per Revolution
http://www.machsupport.com/wp-content/uploads/2014/05/Mach4%20Lathe%20GCode%20Manual.pdf

different gcodes in mill and turn / lathe.
Rob

Albert Einstein ― “If you can't explain it to a six year old, you don't understand it yourself.”