Hello Guest it is March 28, 2024, 05:53:44 PM

Author Topic: M03 Not working  (Read 1823 times)

0 Members and 1 Guest are viewing this topic.

M03 Not working
« on: April 16, 2018, 03:06:22 AM »
Hi
Ive just been upgrading my plasma table, but I must have inadvertantly changed a setting somewhere.

When I click 'spindle toggle' in diagnostics it turns on and off my plasma 'cut' relay.

But when I type in M03 or M04 it doesn't operate.
Also if I turn on the relay with the screen button it won't switch off with M05

Could someone just give me a nudge?

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: M03 Not working
« Reply #1 on: April 16, 2018, 03:34:11 AM »
This can be caused by a corruption to the .xml file. Try Operator / Restore Settings and roll back to an earlier time (before the problem occurred).

Tweakie.
PEACE

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: M03 Not working
« Reply #2 on: April 16, 2018, 03:42:23 AM »
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: M03 Not working
« Reply #3 on: April 16, 2018, 05:16:02 AM »
Thanks I think it may be a corrupt file.