Welcome, Guest. Please login or register.
Did you miss your activation email?
April 25, 2018, 11:02:38 PM

Login with username, password and session length
Search:     Advanced search
* Home Help Search Calendar Links Login Register
+  Machsupport Forum
|-+  G-Code, CAD, and CAM
| |-+  G-Code, CAD, and CAM discussions
| | |-+  fusion 360 cam gcode to mach3 scale change
Pages: 1   Go Down
Print
Author Topic: fusion 360 cam gcode to mach3 scale change  (Read 128 times)
0 Members and 1 Guest are viewing this topic.
mikey77
Holding

Offline Offline

Posts: 1


View Profile
« on: April 13, 2018, 10:54:01 AM »

hello
i would like to ask for some help im new to cnc and im struggling to figure out a problem,i have a cnc 6040 router using a gecko g540 with a uc100 and a pc running windows 8,the promblem i have is if i load the road runner test gcode it shows normal in the toolpath screen and i can set the machine to run and everything is fine but if i load a gcode from fusion all the measurements are miles out as in the part is now larger than designed.the part is only 83mm diameter and 50mm depth but in mach3 it ends up almost the same size as the machine table?im at a loss any help you be much appreciated.

regards mike
Logged
joeaverage
Active Member

Offline Offline

Posts: 2,860



View Profile
« Reply #1 on: April 13, 2018, 04:02:58 PM »

Hi,
could it be that your machine is interpreting the Gcode as inches whereas the code is actually in mm. This would result in the part being 25.4 times to big.

Read up on G20/G21. They cause Mach to interpret Gcode in inches or mm respectively.

Craig
Logged

My wife left with my best friend...
     and I miss him!
Pages: 1   Go Up
Print
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!