Hello Guest it is March 28, 2024, 04:29:50 PM

Author Topic: Auto zero with ESS not working correctly  (Read 9484 times)

0 Members and 1 Guest are viewing this topic.

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: Auto zero with ESS not working correctly
« Reply #10 on: April 03, 2018, 02:09:30 AM »
Quote
worked first time exactly right

It will not be ‘exactly right’ because there will always be some overrun (Z axis deceleration at the chosen feed-rate) and that line of code is intended to apply the correction but, if you are happy with the results then that’s all that is important.

Tweakie.
PEACE
Re: Auto zero with ESS not working correctly
« Reply #11 on: April 03, 2018, 02:49:15 AM »
Thanks for all the help, I'll probably be back onto ye when the sensors for my homing arrive and I get going on setting them up

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Auto zero with ESS not working correctly
« Reply #12 on: April 03, 2018, 03:04:35 AM »
I removed the line "Code "G0 Z" &ZProbePos"

try to replace it by I  "Code "G1 Z" &ZProbePos"

Looks like you machine is not able to follow G0 Speed.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: Auto zero with ESS not working correctly
« Reply #13 on: April 03, 2018, 03:30:03 PM »
I changed G0 to G1 and it worked lovely, I've backed up everything so I don't have to try and figure that out again