I'm using a PoKeys57E with cnc4pc M16 board. Machine is a lathe. It works fine when it works but I often get this annoying error. Once I see it the machine then stops responding and then a "Connection with the device is lost" error comes promptly. The only thing left is to power-off/power-on 57E and restart Mach4.
I have checked all the wiring to make sure if I have a grounding loop but everything looks fine.
When I first get the 57E from cnc4pc it had v4.1.xx firmware installed. I then updated it to PoKeys v4.2.39 but nothing changed.
Anyway, what causes this error? Is there anything I can do/check?
Thanks,
Suat