Hello Guest it is March 28, 2024, 05:31:37 AM

Author Topic: Slave motor problem  (Read 1323 times)

0 Members and 1 Guest are viewing this topic.

Slave motor problem
« on: January 10, 2018, 07:08:55 PM »
Hello Groove-Guys (get it?),
I have a 4 axis machine with B as a slave to X.
The machine jogs correctly but when running a program the B no longer will run in tandem.
I've replaced the PC so that isn't it.
It ran fine before and jogs so I'd guess it's not a break-out board.
Any ideas would help.
Mario