Hello Guest it is March 28, 2024, 03:08:51 PM

Author Topic: G-code pre-test  (Read 4234 times)

0 Members and 1 Guest are viewing this topic.

G-code pre-test
« on: August 26, 2017, 03:09:35 PM »
When Mach-3 loads a program it automatically reads the program looking for errors like illegal commands, missing parentheses, or other typos.
I really miss that feature in Mach-4!
It is really frustrating after machining for a long time and then it stops because of a typo. >:(
Bertho