Hello Guest it is March 29, 2024, 10:47:36 AM

Author Topic: Go to a coordinate  (Read 2014 times)

0 Members and 1 Guest are viewing this topic.

Go to a coordinate
« on: June 23, 2017, 11:35:40 AM »
Hi,

I've just changed from TurboCNC to Mach3.
On TurboCNC jog mode, there is a "go to..." function,
that we can put a coordinate to go that position.
(For example, I choose X axis's "go to..." and write "30" then machine goes to X30.)

On Mach3, how can I get the same function?

Otherwise everything goes fine, I'm happy to change to Mach3!
Thank you in advance for your replies ;)!

Re: Go to a coordinate
« Reply #1 on: June 23, 2017, 06:57:30 PM »
Hi,
on the NFS website find
Mach3Mill_1.84.pdf

Chapters 6 and 10 probably most immediately useful to you.

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'
Re: Go to a coordinate
« Reply #2 on: June 24, 2017, 06:49:32 AM »
Thank you, I got it!