Hello Guest it is March 28, 2024, 06:34:09 PM

Author Topic: Jogging bug one axis moves others  (Read 1886 times)

0 Members and 1 Guest are viewing this topic.

Jogging bug one axis moves others
« on: June 03, 2017, 05:20:47 PM »
I recently upgraded my hicon integra to closed loop. I also had to upgrade the vsi device and mach4 in order for closed loop to work.
But jogging does not work anymore. Everytime i move one axis some other axis gets commanded positions. Its very frustrating cause i cant set up my jobs. They are very small increments to. I'll move the y and z increments randomly by like 1 yhousands of an inch. Sometimes more. I can see the commanded positions in the Hicon diagnostics to.

When i command the machine through gcode or the mdi. Everything is perfect and glorious. Has anyone else experienced these jogging issues? Im getting kind of desperate to resolve this.

Re: Jogging bug one axis moves others
« Reply #1 on: June 04, 2017, 01:09:22 AM »

what is the motion threshhold value in each axis setting?  try set it to 1 or 2. 

config > plugin > hicon > axis config windows

we can also do remote login on Monday to try to sort out the issue.  please message to support email address.


regards,
Rufi