Hello Guest it is March 29, 2024, 06:22:39 AM

Author Topic: Rot 360 rollover question  (Read 3397 times)

0 Members and 1 Guest are viewing this topic.

Rot 360 rollover question
« on: May 25, 2017, 04:00:05 AM »
Hello ,
i'm having trouble with tangential control , i write a simple macro (M45) that when i use G02/G03 to turn on Tangential control after executing block to turn in off , but after that in general config Rot360Rollover stays checked and that mess up my program , i am using cam software , who controls A axis to be in the direction of cutting exept in G02 and G03 . So my question is  Is it possible to turn off Rot360Rollover in a macro automatically.
Thanks in Advane

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Rot 360 rollover question
« Reply #1 on: August 19, 2017, 06:56:54 PM »
Quote
So my question is  Is it possible to turn off Rot360Rollover in a macro automatically

That is part of your configuration. I don't know if one has access to that internal  function and thus you can't do it on the fly.
I may stand to be corrected on this. :D

RICH