Hello Guest it is March 28, 2024, 04:38:50 AM

Author Topic: Post Processor  (Read 1874 times)

0 Members and 1 Guest are viewing this topic.

Post Processor
« on: February 08, 2017, 01:33:37 PM »
What post processor do I pick when using VCarve pro 8.

firechief
Stop Drop and Roll
Re: Post Processor
« Reply #1 on: February 10, 2017, 08:55:24 PM »
Hi,
I don't know Vcarve but know that in most cases if Mach is not listed as a separate post then its common to
choose a Fanuc post. I do this with my CAM program and it produces one or two quirks that don't go down well
in Mach it is otherwise pretty good. Usually I have to edit 2-3 lines before loading and running in Mach.

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: Post Processor
« Reply #2 on: February 11, 2017, 03:05:20 AM »
What post processor do I pick when using VCarve pro 8.

firechief

Mach2/3 Arcs .... or  Mach2/3 ATC Arcs .... work just fine.

Tweakie.
PEACE
Re: Post Processor
« Reply #3 on: February 11, 2017, 10:38:50 AM »
Thanks all for your help.
« Last Edit: February 11, 2017, 10:41:30 AM by Firechief »
Stop Drop and Roll