Welcome, Guest. Please login or register.
Did you miss your activation email?
April 21, 2018, 05:45:24 PM

Login with username, password and session length
Search:     Advanced search
* Home Help Search Calendar Links Login Register
+  Machsupport Forum
|-+  General CNC Chat
| |-+  Building or Buying a Wood routing table.. Beginnners guide..
| | |-+  inconsistency in Z axis
Pages: « 1 2   Go Down
Print
Author Topic: inconsistency in Z axis  (Read 4433 times)
0 Members and 1 Guest are viewing this topic.
noob64
Active Member

Offline Offline

Posts: 13


View Profile
« Reply #10 on: February 12, 2017, 01:15:06 PM »

I will take it apart later today and take some pictures. It is a home build with a lot of "opportunity" to improve
Logged
TOTALLYRC
Active Member

Offline Offline

Posts: 790


View Profile
« Reply #11 on: February 12, 2017, 08:12:35 PM »

Unless the pillow block is a press fit on the screw all it is doing is supporting the screw radially and not axially.


Mike
Logged

We never have the time or money to do it right the first time, but we somehow manage to do it twice and then spend the money to get it right.
noob64
Active Member

Offline Offline

Posts: 13


View Profile
« Reply #12 on: February 12, 2017, 08:19:19 PM »

It has two set screws on it
Logged
TOTALLYRC
Active Member

Offline Offline

Posts: 790


View Profile
« Reply #13 on: February 12, 2017, 08:50:31 PM »

I just checked a few sites and that style of pillow block is really designed to take radial loads. It is not really designed for axial loads so some end play is normal.

Mike
Logged

We never have the time or money to do it right the first time, but we somehow manage to do it twice and then spend the money to get it right.
noob64
Active Member

Offline Offline

Posts: 13


View Profile
« Reply #14 on: February 12, 2017, 09:55:35 PM »

I'll have to look into what the usual method of control is
Logged
adprinter
Active Member

Offline Offline

Posts: 125


View Profile
« Reply #15 on: January 02, 2018, 02:53:27 AM »

I cut a shoulder into the lead screw at both ends of the Z axis on my machine. Secure mounting of the pillow bearing blocks serves to form a "Clamped" lead screw. The only "Play" left is in the recirculating ball bearing nut assembly of the Z itself. I did have to experiment with different "Shims" in mounting of the pillow block bearings until I achieved movement without any binding. Also, I used the set screw hole of the coupler as the guide for where to drill an indendation into the lead screw into which the set screw is locked.  Never had any slippage since! Engravings in particular require precise repeatable movements to within .001" I realize this post is almost a year old, but perhaps anyone else who may be building their own machine, may benefit from this comment. Have a blessed new year!
Logged
Pages: « 1 2   Go Up
Print
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!