Hello Guest it is March 29, 2024, 07:08:37 AM

Author Topic: MachScreen LED Problem (Image Resize + OEM Code)  (Read 4937 times)

0 Members and 1 Guest are viewing this topic.

MachScreen LED Problem (Image Resize + OEM Code)
« on: October 21, 2016, 12:35:33 PM »
Hello,

I'm currently building a new screen and I stumbled upon a problem that I, for the love of god, can't get rid off. I tried for 3 hours and so here I am ;)

Basically, I want to display a LED next to the menu item (Programm, MDI, Settings..) depending on which site is currently active. Does anyone has the OEM code number for that? I tried index/826 but all LEDs are on.

But the real problem is that I can't load a custom LED image (png). It get's resized everytime. It's like the program crops a part of it and when I enter the correct size in the fields the cropped image is resized but of course therefore not correctly.

Any help is HIGHLY appreciated!!
Cheers,
Hancock

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: MachScreen LED Problem (Image Resize + OEM Code)
« Reply #1 on: October 21, 2016, 03:06:15 PM »
Does your image have both on and off states, side by side? Only half of the image is displayed.
Like this:
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: MachScreen LED Problem (Image Resize + OEM Code)
« Reply #2 on: October 21, 2016, 05:02:10 PM »
Does your image have both on and off states, side by side? Only half of the image is displayed.
Like this:

T H A N K S!!! Now the image is shown correctly sized. Now I have to figure out why it's not switching ;)

BTW: Do you happen to know if there's a manual for MachScreen? I want to customize different fonts and colors...

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: MachScreen LED Problem (Image Resize + OEM Code)
« Reply #3 on: October 21, 2016, 06:52:44 PM »
No, I don't know, as I use Screen4.
You can't use multiple fonts in a Mach3 screen. You only get to choose one, and it's done in Mach3.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: MachScreen LED Problem (Image Resize + OEM Code)
« Reply #4 on: October 24, 2016, 11:38:20 AM »
Hi Hancock,

if you want a control be displayed on every page the best way is to put it on screen 0.


Klaus
The brain isn't a soap, it doesn't shrink when used.