the gear changing works, but still not perfect

https://youtu.be/y3hXnMe5g_8

picture

Hey, how is your progress? I have some small adjustments to make on mine and then hopefully I will run my machine on the end of January 2018
Still having some position correction we are talking 0.005mm the motor is constantly searching for the position.

hallo slovenec,
it runs, but it needs fine tuning.

there are on all axis belt driven ball screws without gears.

before

Nice job! It looks like new. Can you help me with another mather . Which pull stud are you using the thing on the SK40 tool holder?
I can’t find one that will clamp into my microne.

Bestr regards

A picture for reference
:
http://www.lyndexnikken.com/images/files/CAT40-Mori-Pullstud.jpg

DIN 2080
http://www.eroglumakina.com/de/produkte/zubehor/anzugsbolzen/anzugsbolzen-din-2080
http://www.aydosa-tools.com/index.php/aydosa-products/tooling-systems/accessories-tooling-systems/accessories-pull-studs-din-2080

Ooo man thanks !!! You saved me ! I was losing my mind wich pull stud is the right one !
Thanks alot!


Best regards

I will upload some pictures of my machine.
 

Greetings,

can you help me some more? I have trouble with oil in the upper side in the motor spindle.
I filed some oil in the second hole, and the level raised in the first (oil level checker) in the second it looks like oil is in.
I don't have a clue how much oil t put in and are the two holes in the same oil tank?

I searched the whole internet for manuals Mikron wf3  and all I found are manuals for wf2 and some *********....

Do you know something about this?

Here are some pictures

https://ibb.co/dMgr4c
https://ibb.co/kZKNAH
https://ibb.co/j9WPPc

Sorry pictures here :

https://ibb.co/dMgr4c
https://ibb.co/kZKNAH
https://ibb.co/j9WPPc