Hello Guest it is March 28, 2024, 04:22:19 AM

Author Topic: Stalling Problem with Pokeys and Mach3  (Read 4321 times)

0 Members and 1 Guest are viewing this topic.

Stalling Problem with Pokeys and Mach3
« on: July 25, 2016, 03:32:19 PM »
Hi there,

I tried to optimize my motor tuning with PoKeys57CNC and Mach3. I set the motor parameters to 600 Steps, 7000 mm/min, Acceleration 200. Any motor shows the same behavior. The motor works well in one direction, but in the opposite direction it stalls. I have made a small video of this. Maybe someone has a hint for me.

https://youtu.be/jr2cMCK9-RA

Best regards,

  Holger

Offline NeoTO

*
  •  504 504
    • View Profile
    • PoLabs
Re: Stalling Problem with Pokeys and Mach3
« Reply #1 on: July 25, 2016, 05:00:27 PM »
What current setting and what voltage are you running the motor at?
www.poscope.com home of PoKeys USB HID, IO, USB, Ethernet controler and PoScope USB PC oscilloscope
Re: Stalling Problem with Pokeys and Mach3
« Reply #2 on: July 28, 2016, 01:12:20 PM »
Motors are new or used ?
Maybe motor has problem on CCW move bocuse of broken bearings in motor with very high acceleration ?