Hello Guest it is March 29, 2024, 06:46:12 AM

Author Topic: Problem with Feed rate in Win7 32 Bits  (Read 1952 times)

0 Members and 1 Guest are viewing this topic.

Problem with Feed rate in Win7 32 Bits
« on: July 25, 2016, 11:44:31 AM »
I have observed a strange problem while migrating my Mach3 program from win xp machine to Win7 32 bit machine. If I give a command G01 X 100.0 F 100, what I get actually is a feed of 84 in place of commanded 100 mm/min. I have observed the same condition, while trying mach3 demo with win7 32 bit laptop. This happens with mill or turn equally.
The same program runs just fine with win xp machine. If i give a feed override of 120%, the feed attains nearly 100.8
Can some one point any reason for this kind of behavior?

Best Regards,
M Vyas