I've read all the codes and understand what they do but it keeps getting stuck on one line: N9 G03 X14.157 Z-9. R0 F1250.
I'm guessing it has to do with the Z or the rapids to 0 or the feed speed but no matter what value I change to it won't pass this line.
Just stops no error. Any one tell me why?
Source:
O0001
N1 G17 G21 G40 G80
N2 (10mm CRB 2FL 14 LOC)
N3 T10 M06
N4 S5000 M03
N5 G54
N6 M08
N7 G90 G00 X-6.843 Y1.283
N8 G43 Z5. H10
N9 G03 X14.157 Z-9. R0 F1250.
N10 G01 X18.157
N11 G03 X-31.843 R-25.
N12 X18.157 R-25.
N13 G00 Z5.
N14 Z25. M09
N15 G91 G28 Z0
N16 G28 X0 Y0
N17 M30