Hello Guest it is March 28, 2024, 05:31:19 AM

Author Topic: Use Hicon Integra to drive +/-10 VDC Servo Amplifiers  (Read 3165 times)

0 Members and 1 Guest are viewing this topic.

Use Hicon Integra to drive +/-10 VDC Servo Amplifiers
« on: April 06, 2016, 06:33:41 PM »
I would like to use the Hicon Integra to drive existing +/-10VDC servo amplifiers.   Does anyone know of a solution to take step/dir and convert to +/- 10 VDC?

I want to use the Hicon Integra now because  I plan to upgrade to AC servo motors in the future.

Thanks,
Jay
Re: Use Hicon Integra to drive +/-10 VDC Servo Amplifiers
« Reply #1 on: April 06, 2016, 06:59:32 PM »
Hello Jay,

Although the HiCON Integra cannot be used for +/-10V axis control, we do have another motion controller that can.

Here is a link to the DSPMC webpage. It can drive +/-10V (analog), step-dir (digital), and EtherCAT drives. EtherCAT is still in the works though.
http://www.vitalsystem.com/portal/motion/dspmc/dspmc.php

Hope this helps.


-Marc
Vital System Inc.