Hello Guest it is March 28, 2024, 11:54:16 AM

Author Topic: Asking about model master X to A .mmg post processor  (Read 2772 times)

0 Members and 1 Guest are viewing this topic.

Asking about model master X to A .mmg post processor
« on: January 12, 2016, 12:55:51 AM »
Hello

I face problem when export my rotary design from artcam to mach3
I but the finish depth 0.1 but it comes on gcode +11 and the safe z also increased
Anyone have idea ?
I thing my design size rong or something like that

Thanks
Re: Asking about model master X to A .mmg post processor
« Reply #1 on: January 13, 2016, 07:35:52 AM »
Just an FYI, we solved this problem and a few others over email.  topic can be closed.
It was more of a machine configuration error then an artcam post processor issue.  All is working as it should.
Re: Asking about model master X to A .mmg post processor
« Reply #2 on: January 13, 2016, 07:38:38 AM »
My friend robert im the same person ahmad that you helped him yesterday, there is no problem now , thanks very much