Greetings to all,
I’ve installed the m6 script on my machine, (thanks for everyone’s hard work), each time it runs the message boxes remain hidden. Obviously sense they can’t be accessed, it’s not possible to complete the routine. The only thing left to do is close Mach4 down. After Mach has closed the message boxes then appear allowing them to be closed also. The other messages in Mach appear to work normally. If an m6 command is in g code the machine will retract the z, move to the tool change position etc. If the command is issued in the MDI, nothing happens but it is apparent that Mach is in a wait condition, waiting for input from the message box. I’m sure there is a simple answer for this, I just can’t find it.
Thanks, Lou