Hello Guest it is March 29, 2024, 11:46:19 AM

Author Topic: EStop and IsMoving Timining  (Read 4959 times)

0 Members and 1 Guest are viewing this topic.

Offline SSPW

*
  •  26 26
    • View Profile
EStop and IsMoving Timining
« on: April 14, 2015, 11:11:12 AM »
I am wondering if anybody can tell me the how IsMoving reacts after an EStop is triggered.
When an EStop is triggered, i assume Mach3 decelerates all the axises at the maximum rate, and when the axis is stopped, then resets IsMoving.

Can any of the brain experts confirm this?

I would like to set an output when an estop triggers and reset the output after short delay on the IsMoving is reset.

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: EStop and IsMoving Timining
« Reply #1 on: April 14, 2015, 07:21:55 PM »
Estop does NOT deaccelerate the axis it simply dumps the buffer . You will loose positon . 

(;-) TP
Re: EStop and IsMoving Timining
« Reply #2 on: April 14, 2015, 07:29:01 PM »
NEVER push the big red button while moving, unless you really really really need it to stop!