Hello Guest it is March 28, 2024, 05:18:17 AM

Author Topic: home individual axes from gcode or macro?  (Read 2380 times)

0 Members and 1 Guest are viewing this topic.

home individual axes from gcode or macro?
« on: January 27, 2015, 10:16:28 AM »
Can I home just 1 axis from from gcode or a macro? Or am I limited to zeroing all axes at once?

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: home individual axes from gcode or macro?
« Reply #1 on: January 27, 2015, 11:41:50 AM »
G28.1 Z0       Homes Z
G28.1 X0       Homes X
etc
etc
Re: home individual axes from gcode or macro?
« Reply #2 on: January 27, 2015, 11:54:57 AM »
Thanks loads, I couldn't work that out from the manual.
Re: home individual axes from gcode or macro?
« Reply #3 on: January 27, 2015, 12:15:56 PM »
There's a lot of good info under this little button that might not be in the manuals. :)
Re: home individual axes from gcode or macro?
« Reply #4 on: January 27, 2015, 01:29:22 PM »
I didnt know about that, thanks.