Hello Guest it is March 28, 2024, 08:23:55 PM

Author Topic: Dolphin CAD-CAM  (Read 3612 times)

0 Members and 1 Guest are viewing this topic.

Dolphin CAD-CAM
« on: January 18, 2015, 11:43:46 AM »
I've been using Dolphin with my old Bridgeport, but am looking at getting a 2 axis Lathe witth Mach3. I've noticed a couple of different posts. Which one works best?

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Dolphin CAD-CAM
« Reply #1 on: January 18, 2015, 03:29:42 PM »
Quote
I've noticed a couple of different posts. Which one works best?

I assume that your using Mach and you are meaning Dolphin pp for the lathe.
In that case there are two for Mach3, one for radius and one for diameter for revisions 10 & 11.

RICH
Re: Dolphin CAD-CAM
« Reply #2 on: February 19, 2015, 07:59:51 PM »
Thanks Rich. I got squared away. You were correct, one of radius and another for diameter. I am using the latest, I think 13?