Hi I bought a 2nd hand lathe Emco Turn 140 which is a 2 year ago retrofitted
with Mach3 (version R3.042.040) and an I / O board Pokey55 software Pokey 55
software V2.1.15



Perhaps the / transport (der) shaken loose some electrical wires (fixed
everything put back) and since then there are strange things with the MPG
which is controlled by the Pokey55 ..



Now I thought Mach3 to update to the latest version R3.043.066 >> but it
works with the old existing Pokey 55 software V2.1.15> if so should be
rewritten the scripts for the Toolchanger VB



Please your experience / advice



thx

Based on the old version of the original Mach3, I assume that it was using the old plugin for Mach3 (written by Scott). Do you have any screenshots of the plugin settings?

Screen 1

screen 2

screen 3

screen 4

currently doing the MPG wheel again, but not its tool changer ...

grtz


Frederik

would a pokey 57E and PoKeyCNCaddon want to put in place of pokey55 since there are problems with the Pokey55 + I need additional inputs for safety proxy per axs

Can you help me with diagrams and script for MPG and toolchanger SAUTER Emco Turn 140

Here I would also Mach3 want to upgrade to the latest version

Thank you in advance

Kind regards