Hello Guest it is March 28, 2024, 04:35:15 AM

Author Topic: PoMPG problem to configure in Mach3  (Read 8190 times)

0 Members and 1 Guest are viewing this topic.

Re: PoMPG problem to configure in Mach3
« Reply #10 on: September 17, 2014, 02:52:59 AM »
hello Jure,
I have read all manuals, and set the deadband in all position, from 200 to 2000 where it don't work.

As Polabs suggest me via email, I will try to change the filter in the Pokeys software.