Hello Guest it is March 29, 2024, 06:02:07 AM

Author Topic: The right ""Function" for a button!  (Read 11599 times)

0 Members and 1 Guest are viewing this topic.

Re: The right ""Function" for a button!
« Reply #10 on: March 13, 2014, 07:20:16 PM »
Could you just duplicate page 8 and 9 of the standard 1024.set ?
Like Gerry mentioned earlier ?
Russ
Re: The right ""Function" for a button!
« Reply #11 on: March 13, 2014, 07:46:16 PM »
G-Code .htm now works. I am converting the M-Codes and the G-Gode Letters .bmp's to .htm's to try that. If I don't have any luck, I'll make them pages.

Appreciate the help guys!!

Bob
"For those who fought for it, Freedom has a flavor the protected will never know"

UNKNOWN
Re: The right ""Function" for a button!
« Reply #12 on: March 13, 2014, 08:08:05 PM »
Ok, two down, one to go! But, I'm quitin' for the day as I'm going crazy with this!!!!

"For those who fought for it, Freedom has a flavor the protected will never know"

UNKNOWN
Re: The right ""Function" for a button!
« Reply #13 on: March 13, 2014, 08:09:52 PM »
Hey Bob,
 be sure to let us know how it ends up.

Thanks,
Russ
Re: The right ""Function" for a button!
« Reply #14 on: March 13, 2014, 08:12:15 PM »
I sure will. Again, THANKS to both you guys for the help!!

And even though it's made me nuts trying to figure the program out (as a newbee), I love MachScreen!!

Have a Good night!

Bob
"For those who fought for it, Freedom has a flavor the protected will never know"

UNKNOWN
Re: The right ""Function" for a button!
« Reply #15 on: March 14, 2014, 12:18:58 PM »
GOT IT DONE!
Here's what I finally learned...
Use the Function: Execute Basic-Script, F-code: 34, Execute code: HtmlDialog( GetMainFolder()+"Mach3MillGcode.htm" ), HtmlDialog( GetMainFolder()+"Mach3MillGcodeLetters.htm" ),
and HtmlDialog( GetMainFolder()+"Mach3MillMcode.htm" ) respectively, for each button (G-Codes, G-Code Letters, M-Codes).

I also converted and renamed the .bmp files in the C:\Mach3\Bitmaps\MillBitmaps\ folder for each of those bitmaps (G-codes_US.bmp, G-code-letters_US.bmp; M-codes_US.bmp) to .htm files and put them in the main Mach3 folder.

Now the buttons pull up their respective lists and place them on top of the screen for reference.

Thanks again for the assistance!!
Bob
"For those who fought for it, Freedom has a flavor the protected will never know"

UNKNOWN
Re: The right ""Function" for a button!
« Reply #16 on: March 14, 2014, 12:27:40 PM »
Congrats. Bob, good job !

I'll put this post in my E-toolbox for future reference.  ;)
(now that the hard work and hair loss is taken care of)  :)

Russ
 8)