Hello Guest it is March 28, 2024, 04:02:52 AM

Author Topic: screen problem after upgrading from V1.84 to V3.043  (Read 4118 times)

0 Members and 1 Guest are viewing this topic.

Offline Quin

*
  •  34 34
    • View Profile
screen problem after upgrading from V1.84 to V3.043
« on: January 08, 2014, 09:29:55 PM »
I have been using v1.84 with success but wanted to up grade to V3.043 to take advantage of amending the initialization string.  With V1.84 my screen was fine at a 1024 x 768 resolution.  After I installed V3.043, my screen set would only fill about 80% of the monitor at a resolution of 800 x 600.  What am I over looking?

Quin

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: screen problem after upgrading from V1.84 to V3.043
« Reply #1 on: January 08, 2014, 09:53:30 PM »
Did you enable High res screens and auto screen enlarge in General config.? You will have to close mach and reopen for changes to those 2 to take effect............. or at least reload the screen.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!