Have the latest rev 1.0.6 and still having problems of the tooling path not displaying if any changes are made to the tool selection menu. Example: If the tool rpm is is changed to any number other than the default value the display will not generate a tool path. Just displays a small dot in the middle of the screen.
Actually changing ANY tool menu items... feed rate, rpm, plunge or selecting a different tool from the drop down menu will cause the no display problem. As long as you don't monkey with the default tool menu items the program works. This is the same problem rev 1.0.3 had.... so its still broken.
Seeing the Rev 1.0.6 is STILL DEFECTIVE:
1) Newfangled Solutions should remove the tool selection menu and just have manual input for RPM, Feed and Plunge.
Or A better option...
2) Don't purchase it until Newfangled Solutions can figure it out.