Hello Guest it is March 29, 2024, 08:16:36 AM

Author Topic: X-axes homing  (Read 3766 times)

0 Members and 1 Guest are viewing this topic.

X-axes homing
« on: February 04, 2013, 04:46:15 AM »
Hello all.
I am new to CNC. I have a Legacy Arty.
The thing is when referencing the machine the Z an Y is OK.
On the X axe the gantry moves, hit the switch and reverses but do not stop and does not zero the
machine coordinates.
I thought it was a stuck actuator on the switch, but I have checked that, and even changed the switch
but the same happens. What could cause this?

Hope to get some help finding this.
Re: X-axes homing
« Reply #1 on: April 19, 2014, 02:29:08 AM »
I have an hyCNC 125-4L (Like a SmoothStepper) and my machine will not zero the machine co-ordinates when homing either.
Don't know why.