Hello Guest it is March 28, 2024, 03:43:05 PM

Author Topic: mach 3 screen having problem.  (Read 3585 times)

0 Members and 1 Guest are viewing this topic.

mach 3 screen having problem.
« on: February 07, 2006, 11:14:12 PM »
i am having a problem changing a screen.  on the first screen i added 3 new dro's wanted them to show machine cord. at all time no matter what i do with the work cord. system.  i read the screendesigner book.  and pluged in oem codes 83, 84, 85 and the dro's work but when i change the machine cord.button to show work cord's under the original dro's. it also changes the new dro's that i added.  i hope this makes sense.  is their any thing i am missing on doing this. or can it not be done?

thanks for your help.
Re: mach 3 screen having problem.
« Reply #1 on: February 08, 2006, 05:29:27 AM »
It is all working here... could you give me a bit more?
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Art

*
Re: mach 3 screen having problem.
« Reply #2 on: February 08, 2006, 07:53:22 AM »
Hi:

  Are you sure you checked the OEMcode box? The codes your using shouldnt change with selection, they should just show the machine coords at all times..

Art
Re: mach 3 screen having problem.
« Reply #3 on: February 08, 2006, 05:44:48 PM »
ok my machine just made a big liar out of me.  when to try it and it works i did check the oem code buttons before.  it does give a message before it closes the dro window "the hot key just duplicates another on function = -1 oem code 0 at x=431 y=740" . what does that mean?  thanks for your time guys.