Hello Guest it is March 29, 2024, 01:55:26 AM

Author Topic: How are folks Homing the Slaved Axes when using a Smoothstepper ?  (Read 12660 times)

0 Members and 1 Guest are viewing this topic.

Re: How are folks Homing the Slaved Axes when using a Smoothstepper ?
« Reply #10 on: November 12, 2015, 10:20:31 AM »
rdean

How is your smoothstepper setup.. Cause I can't get mine to work. I'm using an ESS Smoothstepper, well right now I'm not using it. But I have it sitting around, and would like to be able to do so in the future.

Offline rdean

*
  •  94 94
    • View Profile
Re: How are folks Homing the Slaved Axes when using a Smoothstepper ?
« Reply #11 on: November 12, 2015, 11:02:33 AM »
Thread is a little old but mine is still working fine.
What problems are you having?

Ray
Re: How are folks Homing the Slaved Axes when using a Smoothstepper ?
« Reply #12 on: November 12, 2015, 04:16:35 PM »
I'm having the problem when homing x axis with a slave on two home switches.

Offline rdean

*
  •  94 94
    • View Profile
Re: How are folks Homing the Slaved Axes when using a Smoothstepper ?
« Reply #13 on: November 12, 2015, 04:44:20 PM »
I had an issue with that when I first got an ESS. 
The setup screen for the ESS controls the debounce for the inputs not Mach3.

That is where I would start.
Ray
Re: How are folks Homing the Slaved Axes when using a Smoothstepper ?
« Reply #14 on: November 12, 2015, 05:51:27 PM »
Ok. I'll have a look at it if I mount the ESS again... :)