Hello Guest it is March 29, 2024, 03:44:04 AM

Author Topic: z in gcode  (Read 3980 times)

0 Members and 1 Guest are viewing this topic.

z in gcode
« on: July 30, 2012, 08:41:06 PM »
I am able to post my dxf file to gcode in lazycam....but when i open it in Mach3.....the z starts goes to 60 and then goes all the way back to 0 before anything actually happens....how do i get it to stop doing this?

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: z in gcode
« Reply #1 on: July 31, 2012, 06:57:17 AM »
Have a read of  Tutorial #6 in the manual.
RICH