Hello Guest it is March 28, 2024, 05:59:20 AM

Author Topic: need code for viper. pic inlcuded..  (Read 7867 times)

0 Members and 1 Guest are viewing this topic.

need code for viper. pic inlcuded..
« on: July 01, 2012, 10:40:03 AM »
Wanting to cut this for my kids car.  Here is a pic he wants. I dont know how to fit this to the plate I made tho.here is the pic.

Thanks alot if you can do this. I dont know if I can machine this or not but would love to try to engrave it in a bumper plaque.   Thanks Jim
Re: need code for viper. pic inlcuded..
« Reply #1 on: July 01, 2012, 08:42:18 PM »
A better image would help

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: need code for viper. pic inlcuded..
« Reply #2 on: July 01, 2012, 11:24:52 PM »
Considering the postage stamp size picture (;-) It is as good as I can get it. It is setup for engraving .050 deep with .010 steps

(;-)TP
Re: need code for viper. pic inlcuded..
« Reply #3 on: July 02, 2012, 07:19:07 AM »
Sorry about picture size. I cant open the "tap" file. I assume that file has the G code.  Thanks for helping.
Re: need code for viper. pic inlcuded..
« Reply #4 on: July 02, 2012, 07:50:05 AM »
did a search and see stuff to open a tap file. will wait until kid helps me pick a file out to download it. I am afraid of getting a virus.
Re: need code for viper. pic inlcuded..
« Reply #5 on: July 02, 2012, 07:53:24 AM »
Mach can open it.
Or, change the extension to  .txt  and you can open it with Notepad.
Mach can run it either way.
Russ
Re: need code for viper. pic inlcuded..
« Reply #6 on: July 02, 2012, 08:49:29 AM »
 thanks Russ!
Re: need code for viper. pic inlcuded..
« Reply #7 on: July 04, 2012, 06:31:05 PM »
Thanks BR549,

  I tried it and its too big. I dont know how you guys do this but it is neat! Had fun watching it test run on mach.