Hello Guest it is March 29, 2024, 10:56:27 AM

Author Topic: Counter Readout  (Read 3794 times)

0 Members and 1 Guest are viewing this topic.

Counter Readout
« on: May 30, 2012, 01:02:04 AM »
I would like to have a counter for every hole that has been drilled.  I have a basic system that drills hole on a continuous ribbon of brass.  I would like to know how many holes have been drilled so I know how dull the bit might be getting.  I would reset it at the time of changing the bit.

Thanks.  Eddy

Offline stirling

*
  • *
  •  2,188 2,188
  • UK
    • View Profile
    • www.razordance.co.uk
Re: Counter Readout
« Reply #1 on: May 30, 2012, 03:23:43 AM »
Eddy - please do not cross post - especially numerous times. you already have an active thread for this here http://www.machsupport.com/forum/index.php/topic,20499.msg142371.html#msg142371
« Last Edit: May 30, 2012, 03:26:09 AM by stirling »