Hello Guest it is March 28, 2024, 07:31:21 AM

Author Topic: Help , newbie needing a ?FREE? cam program that will translate an STL to G code  (Read 7729 times)

0 Members and 1 Guest are viewing this topic.

 :)

Alex
Nope , STILL haveing problems.

How do I change/add to an stl file to be able to post it here?
Hi,
if the file is less than 2MB, then you can email it to me.
Alex
Nope , STILL haveing problems.

How do I change/add to an stl file to be able to post it here?
you could put it in a zip file.

John
SUCCESS !                                                                                         SUCCESS !

THANKS for at least not ignoring the newbie , and the offers of help ;D

FINALLY got it to work

Dolpin - partmaster CAD - Lazycam - G code - Mach3

Took quite a while to finally get dolpin to draw it without errors

Can draw the part from scratch in 2min 40 seconds now :-*
« Last Edit: September 29, 2012, 06:02:35 PM by toothandnail »

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
 :)  Glad you got it sorted. 

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Graet !  :D

Alex