Hello Guest it is March 28, 2024, 08:19:52 AM

Author Topic: Pokeys 56u for homing ?  (Read 3534 times)

0 Members and 1 Guest are viewing this topic.

Pokeys 56u for homing ?
« on: February 19, 2012, 06:31:22 PM »
Hi
Is it possible to use Pokeys 56U for homing the CNC?
If i have understood this correct, i can map pins to mach, and then connect the homing swich to the Pokey.
Is the respons time from the usb good enough to be usable for homing?

Im thankfull for any info on this topic.

Offline borisz

*
  •  220 220
    • View Profile
    • www.poscope.com
Re: Pokeys 56u for homing ?
« Reply #1 on: February 20, 2012, 01:35:08 AM »
Hi!

For now it is not possible.
Please check www.poscope.com in about 2-4 weeks.
Something is under development and looks very promising ;)
www.poscope.com home of PoKeys USB HID, IO, USB, Ethernet controler and PoScope USB PC oscilloscope

Offline borisz

*
  •  220 220
    • View Profile
    • www.poscope.com
Re: Pokeys 56u for homing ?
« Reply #2 on: May 31, 2012, 07:19:30 PM »
Homing is now possible on both PoKeys versions USB and ethernet with latest software and Mach plugin avaiable on www.psocope.com
www.poscope.com home of PoKeys USB HID, IO, USB, Ethernet controler and PoScope USB PC oscilloscope